Column Type Pay-off and Take-up
الوصف
It is mainly used for all kinds of cable extrusion, rewinding lines, etc. to pay-off from the bobbin or rewind into a reel.
2. Structural Features
(1) There are casing type and flat plate type structure, which can decide whether the foundation is needed according to the customer’s requirements.
(2) The column is welded with high quality steel, with clamping protection device, up and down lifting with limit protection.
(3) The electrical box has the same lift, at the same time left and right movement and separate left and right movement function, the two columns are each installed with separate control of lift, left and right movement control button.
(4) The line is arranged by a wire rod, gap line, automatic reversing, no noise.
3. Technical Parameters
|
Model |
1250 |
1600 |
2000 |
2500 |
3150 |
|
Applicable bobbins（mm） |
Φ630～Φ1250 |
Φ800～Φ1600 |
Φ1250～Φ2000 |
Φ1600～Φ2500 |
Φ1600～Φ3150 |
|
Load capacity (t) |
max.4 |
max.5 |
max.10 |
max.12 |
max.18 |
|
Applicable wire diameter（mm) |
≤25 |
≤35 |
≤50 |
≤60 |
≤100 |
|
Traversing pitch (mm) |
5～40 |
5～40 |
10～80 |
10～100 |
25～140 |
|
Take-up speed (m/min) |
≤100 |
≤100 |
≤80 |
≤60 |
≤60 |