Copper Rod Breakdown Machine with Individual Drivers

The copper rod breakdown machine with individual drivers can draw up to 8 mm copper rods. It is equipped with an online
annealing machine to perform online annealing after drawing to realize the "continuous drawing and continuous annealing" function to improve the mechanical properties and electrical performance of copper wire.
Each drawing capstan of the machine is driven by individual motors. The driving of the drawing capstans that do not need
to be operated can be turned off to save electricity. At the same time, multi-motors driven technology achieves micro-sliding during the drawing process, greatly reducing drawing noise and improving the working environment.

Aluminum (Aluminum Alloy) Rod Breakdown Machine
with Individual Drivers

The aluminum (aluminum alloy) rod breakdown machine with individual drivers can draw up to 9.5 mm aluminum (aluminum alloy) rods.
Each drawing capstan of the machine is driven by individual motors. The driving of the drawing capstans that do not need
to be operated can be turned off to save electricity. At the same time, multi-motors driven technology achieves micro-sliding during the drawing process, greatly reducing drawing noise and improving the working environment.

Multiwire Drawing Machine

The aluminum (aluminum alloy) rod breakdown machine with individual drivers can draw up to 9.5 mm aluminum (aluminum alloy) rods.
Each drawing capstan of the machine is driven by individual motors. The driving of the drawing capstans that do not need
to be operated can be turned off to save electricity. At the same time, multi-motors driven technology achieves micro-sliding during the drawing process, greatly reducing drawing noise and improving the working environment.

Bunching Machine

The bunching machine is suitable for stranding of 7-strand copper wires (Class 2) and high speed stranding of multi-strand
fine copper wires (Class 5). It is also suitable for cabling of 2-5 cores small cross-section building wires.

Double Twist Stranding Machine

Double twist stranding machine is suitable for high-speed twisting and compression of conductors with 7-strand copper
wire and aluminum wire, and multi-layer stranding and compacting of 19-strand copper wire and aluminum wire at one
time. It is also suitable for cabling of insulated cables with 2-5 cores.

Single Twist Stranding Machine

The single twist stranding machine is used for the laying-up power cables, building cables, control cables, etc. It can also
be used for high-speed galvanized steel wire armoring and copper wire screening on cable core.

Tubular Stranding Machine

The tubular stranding machine is used for stranding and compacting of copper conductors, and aluminum/ aluminumalloy
conductors. It is also suitable for stranding of steel wires, multi-wire ropes, insulated wires, etc.

High Speed Rigid Frame Stranding Machine

The high speed rigid frame stranding machine is mainly used for stranding or compacting of large-length, large-section
copper conductors, aluminum / aluminum alloy conductors and ACSR. It can also be used for stranding and compacting
or pre-spiral and compacting of sector conductors.

Concentric Stranding Machine

The concentric stranding machine is mainly used for stranding and compacting of circular conductors such as copper
conductors, and aluminum conductors. It can also be used for stranding and compacting or pre-spiral and compacting of
sector conductors. This machine can replace part of the rigid frame stranding machine.

Planetary Stranding Machine

The planetary stranding machine is mainly used for stranding with 100% backtwist of copper conductors, aluminum /
aluminum alloy conductors, multi-stranded wire, OPGW, insulated wire core. etc.

Skip Type Strander

The skip type strander is mainly used for cabling of overhead insulated cables, low-voltage power cables, mine cables,
and other cables with soft-structure and small-diameter.

Cradle Type Laying-up Machine

The cradle type laying-up machine is mainly used for cabling of insulated wires with 3-5 cores. It can be used for twisting
of round cables with backtwist or sector cables without backtwist. It can also be used for medium and low voltage power
cables, control cables, mining cables and other cables with large cross sections.

Drum Twister Laying-up Machine

The drum twister can be used for the cabling of LV/MV power cables, and it can also be used for stranding of Mliliken
conductors. It can also be used for shielding with copper wires and copper tapes, and armoring with steel wires and steel
tapes.

Catenary Continuous Vulcanization (CCV) Line

The catenary continuous vulcanization (CCV) line is designed for triple-layer (conductor shielding layer - insulation layer -
insulation shielding layer) co-extruding of 6-35 kV, 10-132 kV XLPE insulated power cables.

High Speed Insulation Extrusion Line

The high speed insulation extrusion line is mainly suitable for the extrusion of insulation lavers, with a production speed up
to 1000 m/min. Through automatic dual take-up, the take-up can be changed automatically without reducing the speed.
This production line is suitable for the extrusion of thermoplastic materials such as PVC andHFFR. It is suitable for extrusion forms such as single layer, single layer + color skin, single layer + color strip, etc. It can be added Nylon extruder to
produce THHN wires.

Sheathing Extrusion Line

The sheathing extrusion line is mainly suitable for coating cable cores with PVC, PE, LSZH and other thermoplastics using
the hot extrusion method.

Automatic Coiling with Binding and thermal shrinking machine

Introduction The automatic coiling with binding and thermal shrinking machine can complete the fully automatic integration of wire and cable coiling, binding, and shrinking packaging. With this machine, not only can labor costs be saved and production efficiency improved, but product quality stability can also be ensured.