{"id":30671,"date":"2026-06-27T16:32:07","date_gmt":"2026-06-27T16:32:07","guid":{"rendered":"https:\/\/triplearcsolutions.com\/?post_type=product&p=30671"},"modified":"2026-06-27T16:32:07","modified_gmt":"2026-06-27T16:32:07","slug":"drawing-dies","status":"publish","type":"product","link":"https:\/\/triplearcsolutions.com\/ar\/product\/drawing-dies\/","title":{"rendered":"Drawing Dies"},"content":{"rendered":"

1. Introduction<\/h4>\n

Polycrystalline diamond is manufactured by forming a mass of diamond crystals and then applying a combination of heat and pressure. Through this process, the mass becomes a single unit with the diamond particles inter-grown to each other. The final product is extremely wear resistant, maintains tight hole tolerances, and provides good surface finish.
\nCarbide dies have been used in the wire industry for many years. They are used in various drawing applications where diamond dies are not economical or where hole tolerance is not as critical.They are used extensively in the steel industry as well as the nonferrous industry in applications such as bunching or stranding large diameter cables. These dies are available in a large range of nib and hole sizes.<\/p>\n

2. Natural Diamond Dies<\/h4>\n

Key benefits of LINT TOP ND diamond wire dies:<\/strong>
\nLong die life due to its extreme hardness and resistance to scratching.
\nCan be used in high-heat processes because of its extreme thermal conductivity.
\nEasy setup, smooth drawing.
\n100% of all diamonds are checked for inclusions, cracks.
\nNon-conductive properties make this product a good choice when electrical conductive materials are an issue.<\/p>\n

Diameter range and standard tolerance of natural diamond dies:<\/strong><\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Size Range (mm)<\/b><\/p>\n<\/td>\n

\n

Standard Tolerance (mm)<\/b><\/p>\n<\/td>\n

\n

Roundness(mm)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

-0.020\u02c9<\/p>\n<\/td>\n

\n

0.0007<\/p>\n<\/td>\n

\n

0.00035<\/p>\n<\/td>\n<\/tr>\n

\n

0.020-0.051\u02c9<\/p>\n<\/td>\n

\n

0.0010<\/p>\n<\/td>\n

\n

0.0005<\/p>\n<\/td>\n<\/tr>\n

\n

0.051-0.102\u02c9<\/p>\n<\/td>\n

\n

0.0010<\/p>\n<\/td>\n

\n

0.0005<\/p>\n<\/td>\n<\/tr>\n

\n

0.102-0.203\u02c9<\/p>\n<\/td>\n

\n

0.0015<\/p>\n<\/td>\n

\n

0.00075<\/p>\n<\/td>\n<\/tr>\n

\n

0.203-0.508\u02c9<\/p>\n<\/td>\n

\n

0.0020<\/p>\n<\/td>\n

\n

0.0010<\/p>\n<\/td>\n<\/tr>\n

\n

0.508-1.016\u02c9<\/p>\n<\/td>\n

\n

0.003<\/p>\n<\/td>\n

\n

0.0015<\/p>\n<\/td>\n<\/tr>\n

\n

1.016-1.524\u02c9<\/p>\n<\/td>\n

\n

0.0050<\/p>\n<\/td>\n

\n

0.0025<\/p>\n<\/td>\n<\/tr>\n

\n

1.524-1.981\u02c9<\/p>\n<\/td>\n

\n

0.007<\/p>\n<\/td>\n

\n

0.0035<\/p>\n<\/td>\n<\/tr>\n

\n

\uff1e1.981<\/p>\n<\/td>\n

\n

0.010<\/p>\n<\/td>\n

\n

0.005<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Typical reduction angle and bearing length:<\/strong><\/p>\n

\n\n\n\n\n\n\n\n\n
\n

Reduction of Area<\/b><\/p>\n<\/td>\n

\n

Lead\/Zinc\/<\/b><\/p>\n

Silver\/Gold<\/b><\/p>\n<\/td>\n

\n

Aluminum<\/b><\/p>\n

\/Nickel\/Copper<\/b><\/p>\n<\/td>\n

\n

Brass Bronze<\/b><\/p>\n

Stainless Steel<\/b><\/p>\n<\/td>\n

\n

High Carbon Steel<\/b><\/p>\n<\/td>\n

\n

Hot Tungsten<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

8-12\uff05<\/p>\n<\/td>\n

\n

16\u00b0<\/p>\n<\/td>\n

\n

12\u00b0<\/p>\n<\/td>\n

\n

11\u00b0<\/p>\n<\/td>\n

\n

10\u00b0<\/p>\n<\/td>\n

\n

10\u00b0<\/p>\n<\/td>\n<\/tr>\n

\n

12-16\uff05<\/p>\n<\/td>\n

\n

18\u00b0<\/p>\n<\/td>\n

\n

14\u00b0<\/p>\n<\/td>\n

\n

13\u00b0<\/p>\n<\/td>\n

\n

12\u00b0<\/p>\n<\/td>\n

\n

12\u00b0<\/p>\n<\/td>\n<\/tr>\n

\n

16-25\uff05<\/p>\n<\/td>\n

\n

22\u00b0<\/p>\n<\/td>\n

\n

18\u00b0<\/p>\n<\/td>\n

\n

16\u00b0<\/p>\n<\/td>\n

\n

15\u00b0<\/p>\n<\/td>\n

\n

12\u00b0<\/p>\n<\/td>\n<\/tr>\n

\n

25-35\uff05<\/p>\n<\/td>\n

\n

24\u00b0<\/p>\n<\/td>\n

\n

22\u00b0<\/p>\n<\/td>\n

\n

19\u00b0<\/p>\n<\/td>\n

\n

18\u00b0<\/p>\n<\/td>\n

\n

14\u00b0<\/p>\n<\/td>\n<\/tr>\n

\n

Bearing length<\/p>\n<\/td>\n

\n

0.2-0.5d<\/p>\n<\/td>\n

\n

0.4-0.8d<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Note: we also provide artificial diamond dies with competitive price.<\/p>\n

3. Polycrystalline Diamond Dies<\/h4>\n

Key benefits of diamond wire dies:<\/strong>
\nAvailable for almost any type of wire drawing operation, from rod-size to fine-size.
\nCan be used for wet and dry\u00a0drawing applications.
\nPredictable wire surface quality.
\nContain randomly oriented diamond crystals, making certain that wire remains round; even with significant wear the wire remains round.
\nBlank dimensions are guaranteed, hence maximum recut dimensions can be predicted.<\/p>\n

Diameter range and standard tolerance of natural diamond dies:<\/strong><\/p>\n

\n\n\n\n\n\n\n\n\n\n\n
\n

Size Range (mm)<\/b><\/p>\n<\/td>\n

\n

Standard Tolerance (mm)<\/b><\/p>\n<\/td>\n

\n

Roundness(mm)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

0.051-0.102\u02c9<\/p>\n<\/td>\n

\n

0.0010<\/p>\n<\/td>\n

\n

0.0005<\/p>\n<\/td>\n<\/tr>\n

\n

0.102-0.203\u02c9<\/p>\n<\/td>\n

\n

0.0015<\/p>\n<\/td>\n

\n

0.00075<\/p>\n<\/td>\n<\/tr>\n

\n

0.203-0.508\u02c9<\/p>\n<\/td>\n

\n

0.0020<\/p>\n<\/td>\n

\n

0.0010<\/p>\n<\/td>\n<\/tr>\n

\n

0.508-1.016\u02c9<\/p>\n<\/td>\n

\n

0.003<\/p>\n<\/td>\n

\n

0.0015<\/p>\n<\/td>\n<\/tr>\n

\n

1.016-1.524\u02c9<\/p>\n<\/td>\n

\n

0.0050<\/p>\n<\/td>\n

\n

0.0025<\/p>\n<\/td>\n<\/tr>\n

\n

1.524-1.981\u02c9<\/p>\n<\/td>\n

\n

0.007<\/p>\n<\/td>\n

\n

0.0035<\/p>\n<\/td>\n<\/tr>\n

\n

\uff1e1.981<\/p>\n<\/td>\n

\n

0.010<\/p>\n<\/td>\n

\n

0.005<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Typical reduction angle and bearing length:<\/p>\n

\n\n\n\n\n\n\n\n\n
\n

Reduction of Area<\/b><\/p>\n<\/td>\n

\n

Lead\/Zinc\/<\/b><\/p>\n

Silver\/Gold<\/b><\/p>\n<\/td>\n

\n

Aluminum<\/b><\/p>\n

\/Nickel\/Copper<\/b><\/p>\n<\/td>\n

\n

Brass Bronze<\/b><\/p>\n

Stainless Steel<\/b><\/p>\n<\/td>\n

\n

High Carbon Steel<\/b><\/p>\n<\/td>\n

\n

Hot Tungsten<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

8-12\uff05<\/p>\n<\/td>\n

\n

16\u00b0<\/p>\n<\/td>\n

\n

12\u00b0<\/p>\n<\/td>\n

\n

11\u00b0<\/p>\n<\/td>\n

\n

10\u00b0<\/p>\n<\/td>\n

\n

10\u00b0<\/p>\n<\/td>\n<\/tr>\n

\n

12-16\uff05<\/p>\n<\/td>\n

\n

18\u00b0<\/p>\n<\/td>\n

\n

14\u00b0<\/p>\n<\/td>\n

\n

13\u00b0<\/p>\n<\/td>\n

\n

12\u00b0<\/p>\n<\/td>\n

\n

12\u00b0<\/p>\n<\/td>\n<\/tr>\n

\n

16-25\uff05<\/p>\n<\/td>\n

\n

22\u00b0<\/p>\n<\/td>\n

\n

18\u00b0<\/p>\n<\/td>\n

\n

16\u00b0<\/p>\n<\/td>\n

\n

15\u00b0<\/p>\n<\/td>\n

\n

12\u00b0<\/p>\n<\/td>\n<\/tr>\n

\n

25-35\uff05<\/p>\n<\/td>\n

\n

24\u00b0<\/p>\n<\/td>\n

\n

22\u00b0<\/p>\n<\/td>\n

\n

19\u00b0<\/p>\n<\/td>\n

\n

18\u00b0<\/p>\n<\/td>\n

\n

14\u00b0<\/p>\n<\/td>\n<\/tr>\n

\n

Bearing length<\/p>\n<\/td>\n

\n

0.2-0.5d<\/p>\n<\/td>\n

\n

0.4-0.8d<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

4. Tungsten Carbide Wire Drawing Dies<\/h4>\n

Key benefits of carbide dies:<\/strong>
\nSizes are available up to 90 mm rod.
\nCost effectively.
\nEven and round wear during usage.
\nSpecifications of tungsten carbide nibs and dies.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Inches<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Type<\/b><\/p>\n<\/td>\n

\n

(NIB)<\/b><\/p>\n<\/td>\n

\n

(CASING)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Dia.<\/b><\/p>\n<\/td>\n

\n

Ht.<\/b><\/p>\n<\/td>\n

\n

Dia.<\/b><\/p>\n<\/td>\n

\n

Ht.<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

R2<\/p>\n<\/td>\n

\n

.325<\/p>\n<\/td>\n

\n

.330<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n<\/tr>\n

\n

R3<\/p>\n<\/td>\n

\n

.450<\/p>\n<\/td>\n

\n

.380<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n<\/tr>\n

\n

R4<\/p>\n<\/td>\n

\n

.500<\/p>\n<\/td>\n

\n

.450<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n<\/tr>\n

\n

R5<\/p>\n<\/td>\n

\n

.625<\/p>\n<\/td>\n

\n

.600<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n<\/tr>\n

\n

R6<\/p>\n<\/td>\n

\n

.710<\/p>\n<\/td>\n

\n

.700<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

1-1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

R7<\/p>\n<\/td>\n

\n

.768<\/p>\n<\/td>\n

\n

.768<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

1-3\/8<\/p>\n<\/td>\n<\/tr>\n

\n

R8<\/p>\n<\/td>\n

\n

1.000<\/p>\n<\/td>\n

\n

.820<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

1-3\/4<\/p>\n<\/td>\n<\/tr>\n

\n

R9<\/p>\n<\/td>\n

\n

1.187<\/p>\n<\/td>\n

\n

.820<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

1-3\/4<\/p>\n<\/td>\n<\/tr>\n

\n

R10<\/p>\n<\/td>\n

\n

1.500<\/p>\n<\/td>\n

\n

1.000<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n<\/tr>\n

\n

R11<\/p>\n<\/td>\n

\n

1.8300<\/p>\n<\/td>\n

\n

1.250<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

2-1\/4<\/p>\n<\/td>\n<\/tr>\n

\n

R12<\/p>\n<\/td>\n

\n

2.185<\/p>\n<\/td>\n

\n

1.375<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

2-3\/8<\/p>\n<\/td>\n<\/tr>\n

\n

R14<\/p>\n<\/td>\n

\n

2.560<\/p>\n<\/td>\n

\n

1.375<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

2-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

R15<\/p>\n<\/td>\n

\n

3.000<\/p>\n<\/td>\n

\n

1.375<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

2-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

R16<\/p>\n<\/td>\n

\n

3.500<\/p>\n<\/td>\n

\n

1.375<\/p>\n<\/td>\n

\n

7<\/p>\n<\/td>\n

\n

2-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

R17<\/p>\n<\/td>\n

\n

4.000<\/p>\n<\/td>\n

\n

1.500<\/p>\n<\/td>\n

\n

7<\/p>\n<\/td>\n

\n

2-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

R18<\/p>\n<\/td>\n

\n

5.500<\/p>\n<\/td>\n

\n

2.125<\/p>\n<\/td>\n

\n

9<\/p>\n<\/td>\n

\n

4-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

R19<\/p>\n<\/td>\n

\n

6.500<\/p>\n<\/td>\n

\n

2.125<\/p>\n<\/td>\n

\n

11<\/p>\n<\/td>\n

\n

4-1\/2<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

 <\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Millimeters<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Type<\/b><\/p>\n<\/td>\n

\n

NIB<\/b><\/p>\n<\/td>\n

\n

CASING<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Dia.<\/b><\/p>\n<\/td>\n

\n

Ht.<\/b><\/p>\n<\/td>\n

\n

Dia.<\/b><\/p>\n<\/td>\n

\n

Ht.<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

B<\/p>\n<\/td>\n

\n

13<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

30<\/p>\n<\/td>\n

\n

16<\/p>\n<\/td>\n<\/tr>\n

\n

D<\/p>\n<\/td>\n

\n

16<\/p>\n<\/td>\n

\n

14<\/p>\n<\/td>\n

\n

32<\/p>\n<\/td>\n

\n

20<\/p>\n<\/td>\n<\/tr>\n

\n

G<\/p>\n<\/td>\n

\n

22<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n

\n

40<\/p>\n<\/td>\n

\n

26<\/p>\n<\/td>\n<\/tr>\n

\n

H<\/p>\n<\/td>\n

\n

30<\/p>\n<\/td>\n

\n

21<\/p>\n<\/td>\n

\n

66<\/p>\n<\/td>\n

\n

35<\/p>\n<\/td>\n<\/tr>\n

\n

K<\/p>\n<\/td>\n

\n

40<\/p>\n<\/td>\n

\n

25<\/p>\n<\/td>\n

\n

95<\/p>\n<\/td>\n

\n

40<\/p>\n<\/td>\n<\/tr>\n

\n

L<\/p>\n<\/td>\n

\n

50<\/p>\n<\/td>\n

\n

28<\/p>\n<\/td>\n

\n

95<\/p>\n<\/td>\n

\n

48<\/p>\n<\/td>\n<\/tr>\n

\n

M<\/p>\n<\/td>\n

\n

60<\/p>\n<\/td>\n

\n

35<\/p>\n<\/td>\n

\n

114<\/p>\n<\/td>\n

\n

60<\/p>\n<\/td>\n<\/tr>\n

\n

N<\/p>\n<\/td>\n

\n

75<\/p>\n<\/td>\n

\n

35<\/p>\n<\/td>\n

\n

114<\/p>\n<\/td>\n

\n

70<\/p>\n<\/td>\n<\/tr>\n

\n

O<\/p>\n<\/td>\n

\n

90<\/p>\n<\/td>\n

\n

35<\/p>\n<\/td>\n

\n

145<\/p>\n<\/td>\n

\n

70<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

We also provide drawing dies that meet Japanese and German standard.<\/p>","protected":false},"excerpt":{"rendered":"

    \n
  • Payment Terms<\/em>T\/T, L\/C, D\/P, etc.<\/span><\/li>\n
  • Delivery Time<\/em>20 days<\/span><\/li>\n
  • Place of Origin<\/em>China<\/span><\/li>\n
  • Port of Loading<\/em>Shanghai, China<\/span><\/li>\n
  • Shipping<\/em>By air<\/span><\/li>\n
  • HS Code<\/em>8480490000<\/span><\/li>\n
  • Package Size<\/em><\/li>\n
  • Warranty Period<\/em>12 months<\/span><\/li>\n<\/ul>","protected":false},"featured_media":30672,"comment_status":"open","ping_status":"closed","template":"","meta":[],"product_brand":[],"product_cat":[140],"product_tag":[],"class_list":["post-30671","product","type-product","status-publish","has-post-thumbnail","product_cat-dies-and-others","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/product\/30671","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/comments?post=30671"}],"version-history":[{"count":1,"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/product\/30671\/revisions"}],"predecessor-version":[{"id":30673,"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/product\/30671\/revisions\/30673"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/media\/30672"}],"wp:attachment":[{"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/media?parent=30671"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/product_brand?post=30671"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/product_cat?post=30671"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/triplearcsolutions.com\/ar\/wp-json\/wp\/v2\/product_tag?post=30671"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}